Central Florida
Metal Roofing in Orlando, FL
Metal sheds water fast, weighs a fraction of tile and handles wind well when the panels and the fasteners are right. It is also the roof where installation details matter most.
- Standing seam
- Light, fast-shedding
- Free inspection
Overview
A roof that shrugs off the afternoon storm
Orlando summers bring a downpour almost every afternoon. A metal roof sheds that water quickly and does not hold moisture against itself, so it does not grow algae the way a shaded shingle slope does. It also reflects a good deal of heat, which helps on a house with a hot attic.
The tradeoff is the detail work. Metal expands and contracts through the day, so panels, clips and fasteners must be chosen and spaced to move with it. A well-made seam and a correctly placed screw are what make a metal roof last.
Central Florida is inland, so the salt air that attacks metal near the coast is less of a factor here than on a beachfront roof. Fastener quality and panel coating still matter, and we spec them for the exposure.
What to expect
What USA Roofing brings to the job
Fast water shedding
Smooth panels clear rain quickly and hold less moisture, which suits oak-shaded roofs.
Detailed for movement
Clips, seams and fasteners are chosen so panels can expand and contract without opening up.
Wind-minded install
Panel attachment and edge metal follow the manufacturer and the code for your area.
Financing available
You can start with no money down and finance the full project without a credit check. Terms run 10, 20 or 30 years, secured or unsecured.
Standing seam or exposed fastener
Metal roofs come in two broad families, and the difference shows up in cost, look and long-term care.
- Standing seam: raised seams that hide the fasteners, with clips that let the panel move. A cleaner look and fewer holes in the roof surface
- Exposed fastener: screws pass through the panel face with washers that seal them. Less costly to install, but the washers need attention over the years
- Coatings: factory-applied paint systems hold color and resist chalking, and the choice should suit the sun here
- Gauge and panel profile: heavier metal resists denting and oil-canning better
What a metal roof needs under it
Metal does not make a bad deck good. The structure and the underlayment still decide the result.
- Sound decking, replaced where it has softened, fastened to the current requirement
- High-temperature underlayment rated for the heat that builds under metal
- Properly lapped edge metal, closures and flashings at every penetration
- Ventilation planned for the attic, since metal does not breathe the way shingle does
- Compatible fasteners and flashings so different metals do not corrode each other
Where metal makes sense
Metal is a strong option on the right house. It is not a fit for every roof, and we tell you when it is not.
- Good fit: a home you plan to keep, where longevity matters more than the lowest first cost
- Good fit: a roof that sheds a lot of oak debris, where a smooth surface helps
- Good fit: an addition or porch with a low pitch that works with metal panels
- Check first: community rules and color restrictions, since some associations limit metal
- Check first: the existing roof layers and the structure beneath
Roof financing
A roof that cannot wait should not have to
When a leak or a carrier letter sets the schedule, the money should not hold the job up. Our financing lets the work begin with nothing down.
- No credit check required
- $0 down with 100% financing
- Secured and unsecured financing
- 10, 20 and 30 year terms
- No pre-payment penalty
Terms vary with approved credit and project size. Ask us for the exact numbers on your roof.
The monthly payment for a 15-year home improvement installment loan of $10,000 with an APR of 10.99% would be $113. No down payment required. Not all loan products will be available to all partners or all consumers.
Questions
Metal Roofing: your questions
Is a metal roof louder in the rain?
Not when it is installed over a solid deck and underlayment, which dampens the sound. The noise people remember comes from metal over open framing, like a barn.
Do metal roofs attract lightning?
No. Metal does not make a strike more likely, and it will not burn, which is a point in its favor. A grounded home is safer either way.
Can you install metal over my shingle roof?
Sometimes, depending on the layers and local rules, but we usually recommend a tear-off so the deck can be inspected and repaired. We say which option we favor and why.
Will my community allow a metal roof?
Not always. Some associations limit roofing materials, profiles or colors, and some do not allow metal at all. Check your covenants first and get approval in writing before anything is ordered. We can help you read the rules.
Can I finance a metal roof?
Yes. We can finance everything with nothing due up front and no credit check, over 10, 20 or 30 years, and paying early costs nothing extra.
Reviews
Homeowners who trusted a roof inspection first
5.0 out of 5 · 8 verified Google reviewsas of
Recent reviews from our Google Business Profile.
Also see
Other services
Service area
Roofing crews across Central Florida
Orange, Seminole and Osceola counties are our territory, from Orlando out to Windermere, Ocoee, Kissimmee and Altamonte Springs. Choose a town to read about its roofs, or phone us and we will say whether your street is on our route.
Free estimate
Looking at a metal roof?
Book a free inspection and we will send you a roof report, a written estimate and the financing choices. You owe nothing for the visit.
- Call or text(407) 743-3060
- Service areaOrlando, FL and nearby
- State licensesCCC1337306 · CBC1266379
Request a free estimate
Online requests are open around the clock.